Equiped which has a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves in addition to a tank, this energy unit can drive a double acting cylinder to lengthen and retract without a directional solenoid valve. It really is generally used in recre-ational autos, pleasure boats and portable phases, and so forth.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned before installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and no cost of impurities. N46 hydraulic oil is advised.
4. The energy unit shown is intended to be mounted horizontally.
5. Oil modifying is required following the first a hundred operation hrs, afterwards as soon as every 3000 hours.
6. Check the oil level during the tank immediately after the original operating of the electrical power unit.