General Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is intended to operate materials handling tools. The decreasing motion is achived by the solenoid valve with the lowering speed managed by an adjustable needle valve. The left and ideal functions are outfitted using a dual pilot operated check valve and cross-over relief valves.
Remark: Please consult our product sales engineer for the various pump displacement, motor energy or tank capacity.
Special Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned prior to set up of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities.N46 hydraulic oil is suggested.
4. This energy unit ought to be mounted horizontal.
five. Check the oil level while in the tank soon after the initial start out of the energy unit.
six. Oil modifying is needed following the initial one hundred operation hrs, afterwards as soon as each and every 3000 hrs.