Basic Description
This power unit options a long lasting magnet motor having a energy up gravity 
down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve with the lowering velocity controlled by the stress compensated flow handle valve. Goods of this series is usually widely used in the marketplace of logistic gadgets such as fork lift, mini lift table, and so forth.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned before set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and cost-free of impurities. N46 hydraulic oil is suggested.
4. This electrical power unit is made to be mounted vertically.
five. Check the oil level from the tank immediately after the first star on the power unit.
six. Oil transforming is required right after the first 100 operation hrs,afterwards once each and every 3000 hours.
seven. More pump sizes and tank sizes are avaiable on request.
