Highest wear resistance readily available by sealing grease involving pins and bushings
The durability of chain is drastically enhanced since grease is sealed amongst the pins and bushings by O-rings. The O-ring chain is the most reliable model of your Ultimate Daily life Chain Series with its excellent wear resistance even inside the conditions or environments in which chain maintenance is challenging.
Advisable utilizes.
?Conditions wherever frequent chain replacement is required on account of wear stretch
?Conditions in which lubrication throughout the service is not possible
?In an setting with a great deal soil, sand, dust, and so on.
?Applications that need strength higher than that of a sintered bushing roller chain
Other attributes
?Cutting down noise. (The noise level is 3 dB reduced compared to standard roller chains.)
?Decreasing vibration with the friction produced by O-Ring. (The power reduction due to the friction is nearly negligible, because the frictional force in between the pins and bushings is for usually inside the applications.)
Choice of chains
The strength of an O-ring chain is almost the identical as that of a regular roller chain. (Since the pins are longer than those of common roller chain, the common rupture power is slightly decrease.)
For picking an appropriate chain, refer to “Selection of Chains” .
When the services ambient temperature is greater than 80° C, unique heat resistant O-rings must be employed. In this case, get hold of us for far more facts.
Connecting back links and offset back links
Two sorts of connecting hyperlinks are available: clearance match and interference match. When substantial strength or durability is needed, use interference-fit connecting website link. Only 2POJ is accessible because the offset link for all sizes.
Sprockets
O-ring chain uses longer pins than a conventional roller chain. When employing multiplex O-ring chain, the normal sprocket for multiplex chains can’t be employed.
Caution
O-ring chain is just not suggested in applications where solvents or other substances might assault “Nitric Rubber”. Particular material O-rings can also be obtainable for these problems: Please seek the advice of us for facts. Normally, “Nitric Rubber” is damaged by speak to with all the following chemical components.