Material Managing Power UNIT two
This energy unit functions electrical power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve together with the decreasing velocity controlled from the strain compensated movement management valve. Items of this series may be broadly utilized in the sector of logistic units such as fork lift, mini lift table, etc.
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned just before mounting the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
four. Oil altering is needed right after the initial a hundred operation hrs,afterwards when just about every 3000 hrs.
5. The electrical power unit need to be mounted horizontally.
Materials Dealing with Power UNIT 1
This power unit is developed for that fork lift business, consisting of remarkably efficient gear pump, DC motor, guide increase and reduced valve, tank, ect. The up and down motion are controlled through the lever with the manual release valve, and that is equipped with an electric switch to activate the motor. The lowing speed is controlled from the stress compensated flow control valve.
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned prior to set up of the power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is needed following the first one hundred operation hrs, afterwards the moment just about every 3000 hrs.
5. The electrical power unit shown is designed to be mounted horizontally.