Any damage to the teeth surfaces of the sprocket diminishes the life of your conveyor chain.
With traditional sprockets, substantially worn sprocket teeth had been repaired by teeth padding or the total sprocket was replaced. In either case, fix was costly and with teeth padding, accuracy was impaired. We formulated new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our clients to the dramatic cost savings in value and time.
Structure
The teeth is often replaced by two techniques: personal tooth replacement or sectional teeth replacement.
The bolts and nuts utilized for mounting the teeth on towards the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated on the right.
The above photo plus the top rated correct illustration display a sprocket for personal tooth replacement. Since the joint encounter among the replaced teeth and the sprocket is formed in the one of a kind arc, the bonding accuracy is substantial as well as sprocket power is enhanced. On top of that, because the load acting around the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket development is patented.
There are actually two forms of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for substantial sprockets getting heavy loads and welded sheet steel hubs for other applications.