DC MOTOR PUMP GROUP one
Basic Description
Consisting of a hefty duty DC motor along with the CB1S gear pump, this pump motor group is surely an suitable hydraulic electrical power unit for mobile hydraulic equipments, this kind of as vehicle carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
General Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and check valve.
DC MOTOR PUMP GROUP three
Standard Description
This motor pump consists of a 4.5″ DC motor and also a CBSR gear pump which has a common energy up/gravity 
down circuit which has a relief valve, a check valve as well as a solenoid release valve.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned in advance of mounting the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~68 cst, which ought to also be clean and no cost of impurities. N46 hydraulic oil is suggested.
4. The power unit needs to be mounted horizontally.
five. The relief valve pressure is preset about 25% higher than the operating strain.
six. Flow manage valve for lowing pace adjustment is obtainable unpon request.
