Merchandise Description

NSK Pana Max Handpiece with quick connector

Technicals: 

Variety two hole / 4 gap
Design Common, torque
Spray 1 spray
Chuck variety Drive button
Air pressure  .2~.25Mpa
H2o pressure 198kpa (2 kg)  
Speed   370,
three Use what’sapp or SKYPE.

Q5. After the payment accomplished,how i can get the goods ?
A5: We will deliver by FEDEX / EMS/ DHL /UPS/ TNT/CHINA Submit AIR MAIL…. or other convey you require.

Condition: New
Certification: ISO, CE
Material: Stainless Steel
Light Way: Without Light
Water Way: Inner Channel
Usage Times: Non-Disposable

###

Customization:

###

Type 2 hole / 4 hole
Model Standard, torque
Spray 1 spray
Chuck type Push button
Air pressure  0.2~0.25Mpa
Water pressure 198kpa (2 kg)  
Speed   370,000-420,000 rpm
Burs applicable φ1.59mm~φ1.6mm
Noise ≤70dB
Condition: New
Certification: ISO, CE
Material: Stainless Steel
Light Way: Without Light
Water Way: Inner Channel
Usage Times: Non-Disposable

###

Customization:

###

Type 2 hole / 4 hole
Model Standard, torque
Spray 1 spray
Chuck type Push button
Air pressure  0.2~0.25Mpa
Water pressure 198kpa (2 kg)  
Speed   370,000-420,000 rpm
Burs applicable φ1.59mm~φ1.6mm
Noise ≤70dB

What Is a Coupling?

A coupling is a mechanical device that links two shafts together and transmits power. Its purpose is to join rotating equipment while permitting a small amount of misalignment or end movement. Couplings come in a variety of different types and are used in a variety of applications. They can be used in hydraulics, pneumatics, and many other industries.
gearbox

Types

Coupling is a term used to describe a relationship between different modules. When a module depends on another, it can have different types of coupling. Common coupling occurs when modules share certain overall constraints. When this type of coupling occurs, any changes to the common constraint will also affect the other modules. Common coupling has its advantages and disadvantages. It is difficult to maintain and provides less control over the modules than other types of coupling.
There are many types of coupling, including meshing tooth couplings, pin and bush couplings, and spline couplings. It is important to choose the right coupling type for your specific application to get maximum uptime and long-term reliability. Listed below are the differences between these coupling types.
Rigid couplings have no flexibility, and require good alignment of the shafts and support bearings. They are often used in applications where high torque is required, such as in push-pull machines. These couplings are also useful in applications where the shafts are firmly attached to one another.
Another type of coupling is the split muff coupling. This type is made of cast iron and has two threaded holes. The coupling halves are attached with bolts or studs.
gearbox

Applications

The coupling function is an incredibly versatile mathematical tool that can be used in many different scientific domains. These applications range from physics and mathematics to biology, chemistry, cardio-respiratory physiology, climate science, and electrical engineering. The coupling function can also help to predict the transition from one state to another, as well as describing the functional contributions of subsystems in the system. In some cases, it can even be used to reveal the mechanisms that underlie the functionality of interactions.
The coupling selection process begins with considering the intended use of the coupling. The application parameters must be determined, as well as the operating conditions. For example, if the coupling is required to be used for power transmission, the design engineer should consider how easily the coupling can be installed and serviced. This step is vital because improper installation can result in a more severe misalignment than is specified. Additionally, the coupling must be inspected regularly to ensure that the design parameters remain consistent and that no detrimental factors develop.
Choosing the right coupling for your application is an important process, but it need not be difficult. To find the right coupling, you must consider the type of machine and environment, as well as the torque, rpm, and inertia of the system. By answering these questions, you will be able to select the best coupling for your specific application.
gearbox

Problems

A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
China Dental Equipment Medical Device NSK Handpiece Pana Max Quick Coupling Without LED Handpiece     coupling baseChina Dental Equipment Medical Device NSK Handpiece Pana Max Quick Coupling Without LED Handpiece     coupling base
editor by czh 2022-12-02