Centerless lathe, which is frequently known as stripping equipment and peeling machine, is a kind of high efficient rotary chopping system. It is largely used for the processing of spherical metal, copper, titanium and other metallic materials of cylindrical rod. The middle of the centerless lathe is emptyand there is a knife all around the plate. We will approach components here, repair, and then alter the tilt angle of cutter, the cutter starts to spin at higher velocity.
| Design | Enter Dia. | Length | Feeding Velocity | Slicing Depth | Surface Roughness | Dia. Tolerance | Spindle Motor | Whole Electricity |
| mm | mm | m/min | mm | – | – | kw | kw | |
| WXC20 | ф5-ф22 | ≥1400 | 1-25 | .five-two | Ra≤3.two | IT9 | 22 | 30 |
| WXC40 | ф5.5-ф40 | ≥1400 | 1-15 | .five-two | Ra≤3.two | IT9 | forty five | 63 |
| WXC60 | ф14-ф80 | ≥2000 | one-15 | .5-2 | Ra≤3.two | IT9 | 45 | sixty three |
| WXC80 | ф16-ф85 | ≥2200 | one-twelve | .5-three | Ra≤3.two | IT9 | fifty five/seventy five | seventy five/ninety |
| WXC100 | ф25-ф110 | ≥2800 | .five-ten | 1-4 | Ra≤3.2 | IT9 | seventy five | ninety five |
| WXC130 | ф30-ф135 | ≥3000 | .three-6 | one-5 | Ra≤3.two | IT9 | 90 | 120 |
| WXC160 | ф45-ф170 | ≥3500 | .3-5 | one-5 | Ra≤3.2 | IT9 | one hundred ten | 140 |
| WXC200 | ф70-ф210 | ≥4000 | .3-four | one-five | Ra≤3.two | IT9 | 132 | 165 |
| WXC250 | ф95-ф260 | ≥4000 | .2-two.5 | 1-five | Ra≤3.two | IT9 | 160 | 210 |
| WXC350 | ф150-ф360 | ≥4500 | .1-two | one-10 | Ra≤3.2 | IT9 | 200 | 265 |
| WXC400 | ф205-ф410 | ≥4800 | .1-2 | one-10 | Ra≤3.two | IT9 | 250 | 345 |
| WXC500 | ф315-ф510 | ≥5000 | .1-1.5 | 1-10 | Ra≤3.two | IT9 | 315 | 415 |
Attributes of Centerless Lathe
Pursuing benefit in contrast with regular lathe:
1. When processing above-size bar, Centerless Lathe has incomparable positive aspects. Regular lathe is very good at processing quick bar. But there is fantastic restriction for processing extended shaft. In principle, Centerless Lathe can process the bar of infinite size.
two. Centerless Lathe is not only processing bar, also wire rod. Which includes from wire rod to wire rod and from wire rod to bar.That the ordinary lathe can not do it.
3. Processing pace 1~12m/min, the doing work effectiveness of Centerless Lathe is dozens of moments of the ordinary lathe.
4.Large precision, following peeling, tolerance of diameter reach≤IT9, surface area roughness Ra≤6.3μm. But after straightening, Ra≤0.8μm.
Specification
| Specification | WXC60S | |
| Just before Peeling Necessary | Diameter Range(mm) | ф21-ф95 |
| Length(mm) | ≥2200 | |
| Yield Strength σb(Mpa) | ≤1100 | |
| Surface area Hardness | ≤HB320 | |
| Original Curvature(mm/m) | ≤1.50 | |
| Diameter Tolerance | ≤±IT15/2or±1%of diameter | |
| Roundness(mm) | ≤50% of diameter tolerance | |
| Area Roughness(Ra) | ≤25-50µm | |
| Right after Peeling | Diameter Variety(mm) | ф20-ф90 |
| Diameter Reducing Depth(mm) | .35-one.five | |
| Diameter Tolerance | ф20-ф40:≤0.040ф41-ф70:≤0.050ф71-ф90:≤0.080 | |
| Surface Roughness(Ra) | ≤3.2µm | |
| Curvature(mm/m) | ≤1.50 | |
| Roundness(mm) | ф20-ф40:≤0.571ф41-ф70:≤0.571ф71-ф90:≤0.030 | |
| Feeding Pace(m/min) | one.-12. | |
| Cutter CZPT Rotational Speed(rpm) | 300-1200 | |
| Major Equipment Motor Electricity(kw) | 55 | |
| Feeding Motor Electricity(kw) | five.5×2 | |
| Main Equipment Define Proportions(m) | 3.3×3.5×2.4 | |
| Primary Machine Excess weight(t) | 8.five | |
| Whole Capability(kw) | one hundred ten | |
one. Main Machine
Primary device consists of the bed,primary bearings,air/oil lubrication technique,front-clamping pinch feeding and rear-clamping extracting,front guide and middle-rear information program,primary driving system and so on.
2. Air/oil lubrication system
Air/oil lubrication system is specifically developed to solve the lubrication of mainshaft bearings with higher speed rotation.It really is composed of pump,oil and air distribution block and air processing compnents.
3. High stress h2o pump
Substantial force water pump normally takes the cutting liquid cooled from reservoir via pipeline transporting the close to to the nozzle of cutter head,until finally spraying on the equipment and scraps. Then just take absent most the cutting heat and enter into chip cnveyor mouth of at the bottom of cutter head,by means of the pipeline reflow reservoir for cooling.
4. Chip conveyor
The scraps via chip conveyor mouth to be taken to the chain plate and driving belt move with the scraps.Ultimately , the scraps are centralized collection.
five. CZPT system
CZPT technique is made up of pump established of motor, all types of control valves, hydraulic oil tank, hydraulic pipline and many others.By means of controlling the cylinders of front-clamping pinch feeding and rear-clamping extracting to comprehend clamping and loosening for the bar.
six. CZPTal program
CZPTal system involves electrical power supply method and control program,by 1 power dstribution cupboard and 1 button station intergrated procedure,put into action pinch ahead of and following the main transmission technique, feeding method,cooling program,hydraulic technique,the electrical handle of chip conveyor and auxiliary equipment.
OUR SERVIC
Pre-sale services
one. Our expert and experienced engineer staff aids every consumer to uncover his most ideal equipment or chose of plant.
2. Any type of lawful symbol printing or design are CZPT.
3. Excellent High quality + Factory Cost + Quick Reaction + CZPT Support, is what we are trying greatest to offer you you.
Right after you pick:
one. We will make drawing and show you how the pant appears.
2. CZPTy equipment will be checked very carefully before packing. Movie on machine tests is CZPT.
3. Email you the monitoring no., and aid to chase the container until finally it comes you.
Following-sale service
one. We are very glad that buyers give us some recommendation for price and products.
two. If you have any question, please get in touch with us freely by E-mail or Telephone.
FAQ
Q. What is your payment phrase?
A: T/T thirty% down payment, stability to be compensated ahead of shipment.
Q: What is your primary marketplace?
A: South America, CZPT CZPTpe, Southeast Asia, Africa, CZPTia, CZPT Asia
Q: What is your making time?
A: Making time relies upon on that devices you ordered. Normally will take forty five days.
Q: What files you can provide?
A: We can provide invoice, packing list, contract, directions, customs declaration, certification of origin, CE. If consumer need to have other paperwork, requirements, please affirm with service staff.
Q: If equipments have some top quality difficulty, how would you offer with?
A: We will responsible for all the good quality problems. We will check the machine to get the difficulty. If require elements, will send them to you.
Q: How to install the equipments?
A: We deliver one-two engineer (100USD/man or woman/day) to the regional plant for supporting put in and commissioning equipments. To preserve time, our service stuff will explain to you what to get ready in advance. We can also train the employees to how to use the machines and how to make the merchandise greater.
